i4connected Knowledgebase 5.6

The i4SCADA Adapter

Abstract

This article describes the required UI settings of the i4SCADA Adapter configuration. Learn more details by reading this article!

This article describes the required UI settings of the i4SCADA Adapter configuration. An i4SCADA Adapter creates the connection between the i4connected SCADA Device, using the i4SCADA web services to collect signal values and alarm events from it.

Select_i4SCADA_adapter.jpg

The i4SCADA Adapter specific settings

By clicking the Select i4SCADA Adapter name field the Select i4SCADA server panel is opened. In this view, the user can select an existing i4SCADA server or add a new one. The simple filtering mechanism alows the user to easily pin-point the desired i4SCADA Server.

Select_i4SCADA_server.jpg

The Select i4SCADA server panel

In the Add i4SCADA server panel the user can fill in the following settings:

Ad_i4SCADA_Server_panel.jpg

The Add i4SCADA Server panel

  • Name - the name of the new i4SCADA Adapter.

  • Description - the user friendly description of the i4SCADA Adapter.

  • WEBfactory server address - The address of the i4SCADA webservices.

  • Concurrent Connections - The maximum number of connections that the server supports, at one time.

  • Max. number of results / request - The maximum number of records returned by a webservice call. Default value: 1000.

  • Poll interval (ms) - The time, in milliseconds, between two consecutive webservice requests.

  • Username - If required, only when using FTP or Local address. The user name requires to access the directory.

  • Password - If required, only when using FTP or Local address. The password requires to access the directory.

  • Select owner - name of the Adapter owner.

    IoT_owner.jpg

    Adapter owner selector

    By clicking on the owner selector, the Select Users panel is opened allowing the user to chose the Adapter's owner.

    List_of_users.jpg

    Select Users panel

    Important

    When adding a new Adapter the creator user is by default set as Adapter's owner. However, the owner can be changed after the Adapter was saved, by all users having at least the Manage adapters permission enabled.

  • Time zone - The time zone used by the new i4SCADA Adapter. By default, the Time Zone is predefined for the currently logged in user.

  • Trace level - trace levels determine which events the trace provider generates. The user can select the desired trace level from a drop-down list where the following predefined value are available: Trace, Debug, Info, Warn, Error, Fatal and Off.

  • Enabled - If the setting is turned on, the Adapter is enabled and functional.

Tip

For more details about the i4SCADA Signal settings please also visit the dedicated article here.